Temp Entity Events (Half-Life 1)

From AlliedModders Wiki
Jump to: navigation, search
Warning: This template (and by extension, language format) should not be used, any pages using it should be switched to Template:Languages

View this page in:  English  Russian  简体中文(Simplified Chinese)

Add Main Description Here.


Message Types

Sets the type of message the temp entity is transmitted in.

MSG_ types that can be used for dest field in message_begin are as follows:

#define MSG_BROADCAST		0	// unreliable to all
#define MSG_ONE			1	// reliable to one (msg_entity)
#define MSG_ALL			2	// reliable to all
#define MSG_INIT		3	// write to the init string
#define MSG_PVS			4	// Ents in PVS of org
#define MSG_PAS			5	// Ents in PAS of org
#define MSG_PVS_R		6	// Reliable to PVS
#define MSG_PAS_R		7	// Reliable to PAS
#define MSG_ONE_UNRELIABLE	8	// Send to one client, but don't put in reliable stream, put in unreliable datagram (could be dropped)
#define MSG_SPEC		9	// Sends to all spectator proxies


TempEnt Events

Add Description Here.


0: TE_BEAMPOINTS

Creates a beam between two points.


Options

Option Range Default Description
Start X Y Z (coords) Origin of primary entity, or 0 0 0 Starting point of the beam
End X Y Z (coords) Origin of secondary entity, or 0 0 0 Ending point of the beam
Sprite sprite path "sprites/laserbeam.spr" The sprite to use in the beam
FrameStart 0-255 0 The frame to start with in the sprite
FrameRate 0-255 0 The frame rate to show the sprite at, in 0.1s (10 = 1 fps)
Life 0-255 50 The length of time the beam shall remain, in 0.1s (50 = 5 seconds)
Width 0-255 10 The width of the beam in 0.1s
Noise 0-255 10 The noise amplitude of the beam, this controls how much the beam distorts, again in 0.1s
Color R G B 255 255 255 The color of the beam in the RBG triplet value
Brightness 0-255 127 The brightness of the beam
Scroll 0-255 0 The scroll speed of the beam, in 0.1s (??)


Format

#define TE_BEAMPOINTS 0		// beam effect between two points


message_begin(MSG_ ,SVC_TEMPENTITY)
write_byte(TE_BEAMPOINTS)
write_coord()	// start position
write_coord()
write_coord()
write_coord()	// end position
write_coord()
write_coord()
write_short()	// sprite index
write_byte()	// starting frame
write_byte()	// frame rate in 0.1's
write_byte()	// life in 0.1's
write_byte()	// line width in 0.1's
write_byte()	// noise amplitude in 0.01's
write_byte()	// Red
write_byte()	// Green
write_byte()	// Blue
write_byte()	// brightness
write_byte()	// scroll speed in 0.1's
message_end()


1: TE_BEAMENTPOINT

Creates a beam between the primary entity and a point.


Options

Option Range Default Description
Start Entity ID of Entity Primary entity id Starting point of the beam from the id's origin
End X Y Z (coords) Origin of secondary entity, or 0 0 0 Ending point of the beam
Sprite sprite path "sprites/laserbeam.spr" The sprite to use in the beam
FrameStart 0-255 0 The frame to start with in the sprite
FrameRate 0-255 0 The frame rate to show the sprite at, in 0.1s (10 = 1 fps)
Life 0-255 50 The length of time the beam shall remain, in 0.1s (50 = 5 seconds)
Width 0-255 10 The width of the beam in 0.1s
Noise 0-255 10 The noise amplitude of the beam, this controls how much the beam distorts, again in 0.1s
Color R G B 255 255 255 The color of the beam in the RBG triplet value
Brightness 0-255 127 The brightness of the beam
Scroll 0-255 0 The scroll speed of the beam, in 0.1s (??)


Format

#define TE_BEAMENTPOINT 1	// beam effect between point and entity


message_begin(MSG_ ,SVC_TEMPENTITY)
write_byte(TE_BEAMENTPOINT)
write_short()	// start entity
write_coord()	// end position
write_coord()
write_coord()
write_short()	// sprite index
write_byte()	// starting frame
write_byte()	// frame rate in 0.1's
write_byte()	// life in 0.1's
write_byte()	// line width in 0.1's
write_byte()	// noise amplitude in 0.01's
write_byte()	// Red
write_byte()	// Green
write_byte()	// Blue
write_byte()	// brightness
write_byte()	// scroll speed in 0.1's
message_end()


2: TE_GUNSHOT

Creates a particle effect plus a ricochet sound.


Options

Option Range Default Description
Pos X Y Z (coords) Origin of primary entity, or 0 0 0 Position of the gunshot effect


Format

#define TE_GUNSHOT 2		// particle effect plus ricochet sound


message_begin(MSG_ ,SVC_TEMPENTITY)
write_byte(TE_GUNSHOT)
write_coord()	// start position
write_coord()
write_coord()
message_end()


3: TE_EXPLOSION

Creates an additive sprite, 2 dynamic lights, flickering particles, explosion sound, and moves the sprite vertically.


Options

Option Range Default Description
Pos X Y Z (coords) Origin of primary entity, or 0 0 0 Position of the explosion effect
Sprite sprite path "sprites/zerogxplode.spr" The additive sprite to use in the explosion
Scale 0-255 1 The scale of the sprite in the explosion, in 0.1s
FrameRate 0-255 0 The frame rate to show the sprite at, in 0.1s (10 = 1 fps)
Flags 0-15 0 Sets flags for the explosion, you may also add these together:
  • 0: Default Half-Life explosion
  • 1: Sprite will be drawn opaque
  • 2: Do not render the dynamic lights
  • 4: Do not play the explosion sound
  • 8: Do not draw the particles


Format

#define TE_EXPLOSION 3		// additive sprite, 2 dynamic lights, flickering particles, explosion sound, move vertically 8 pps


message_begin(MSG_ ,SVC_TEMPENTITY)
write_byte(TE_EXPLOSION)
write_coord()	// start position
write_coord()
write_coord()
write_short()	// sprite index
write_byte()	// scale in 0.1's
write_byte()	// framerate
write_byte()	// flags
message_end()


4: TE_TAREXPLOSION

Creates the Quake 'tar' explosion.


Options

Option Range Default Description
Pos X Y Z (coords) Origin of primary entity, or 0 0 0 Position of the effect


Format

#define TE_TAREXPLOSION 4	// Quake1 "tarbaby" explosion with sound


message_begin(MSG_ ,SVC_TEMPENTITY)
write_byte(TE_TAREXPLOSION)
write_coord()	// start position
write_coord()
write_coord()
message_end()


5: TE_SMOKE

Creates a rising alphablend sprite at 30 pps.


Options

Option Range Default Description
Pos X Y Z (coords) Origin of primary entity, or 0 0 0 Position of the smoke effect
Sprite sprite path "sprites/steam1.spr" The alphablend sprite to use for smoke
Scale 0-255 1 The scale of the smoke, in 0.1s
FrameRate 0-255 0 The frame rate to show the sprite at


Format

#define TE_SMOKE 5			// alphablend sprite, move vertically 30 pps


message_begin(MSG_ ,SVC_TEMPENTITY)
write_byte(TE_SMOKE)
write_coord()	// start position
write_coord()
write_coord()
write_short()	// sprite index 
write_byte()	// scale in 0.1's 
write_byte()	// framerate 
message_end()


6: TE_TRACER

Creates a tracer effect from one point to another.


Options

Option Range Default Description
Pos X Y Z (coords) Origin of primary entity, or 0 0 0 Starting point of the tracer
End X Y Z (coords) Origin of secondary entity, or 0 0 0 Ending point of the tracer


Format

#define TE_TRACER 6			// tracer effect from point to point


message_begin(MSG_ ,SVC_TEMPENTITY)
write_byte(TE_TRACER)
write_coord()	// start position
write_coord()
write_coord()
write_coord()	// end position 
write_coord()
write_coord()
message_end()


7: TE_LIGHTNING

Simplified options for TE_BEAMPOINTS - Lightning effect.


Options

Option Range Default Description
Pos X Y Z (coords) Origin of primary entity, or 0 0 0 Starting point of the lightning
End X Y Z (coords) Origin of secondary entity, or 0 0 0 Ending point of the lightning
Life 0-255 50 The length of time the lightning shall remain, in 0.1s (50 = 5 seconds)
Width 0-255 10 The width of the lightning in 0.1s
Noise 0-255 10 The noise amplitude of the lightning, this controls how much it distorts, again in 0.1s
Sprite sprite path "sprites/laserbeam.spr" The sprite to use in the lightning


Format

#define TE_LIGHTNING 7		// TE_BEAMPOINTS with simplified parameters


message_begin(MSG_ ,SVC_TEMPENTITY)
write_byte(TE_LIGHTNING)
write_coord()	// start position
write_coord()
write_coord()
write_coord()	// end position 
write_coord()
write_coord()
write_byte()	// life in 0.1's 
write_byte()	// width in 0.1's 
write_byte()	// amplitude in 0.01's 
write_short()	// sprite model index
message_end()


8: TE_BEAMENTS

Creates a beam between the primary entity and another entity.


Options

Option Range Default Description
Start Entity ID of Entity Primary entity id Starting point of the beam from the id's origin
End Entity ID of Entity Secondary entity id Ending point of the beam to the id's origin
Sprite sprite path "sprites/laserbeam.spr" The sprite to use in the beam
FrameStart 0-255 0 The frame to start with in the sprite
FrameRate 0-255 0 The frame rate to show the sprite at, in 0.1s (10 = 1 fps)
Life 0-255 50 The length of time the beam shall remain, in 0.1s (50 = 5 seconds)
Width 0-255 10 The width of the beam in 0.1s
Noise 0-255 10 The noise amplitude of the beam, this controls how much the beam distorts, again in 0.1s
Color R G B 255 255 255 The color of the beam in the RBG triplet value
Brightness 0-255 127 The brightness of the beam
Scroll 0-255 0 The scroll speed of the beam, in 0.1s (??)


Format

#define TE_BEAMENTS 8		// Create a beam between two entities


message_begin(MSG_ ,SVC_TEMPENTITY)
write_byte(TE_BEAMENTS)
write_short()	// start entity
write_short()  // end entity
write_short()	// sprite index
write_byte()	// starting frame
write_byte()	// frame rate in 0.1's
write_byte()	// life in 0.1's
write_byte()	// line width in 0.1's
write_byte()	// noise amplitude in 0.01's
write_byte()	// red
write_byte()	// green
write_byte()	// blue
write_byte()	// brightness
write_byte()	// scroll speed in 0.1's
message_end()

107: TE_EXPLODEMODEL

Spherical shower of models, picks from set.


Options

Option Range Default Description
Pos X Y Z (coords) Origin of primary entity, or 0 0 0 Position of the explode model effect
Velocity 1-255 10 The velocity of explode model.
Model Index model path "models/gib_skull.mdl" The file path of model to explode.
Count 1-1000 1 The number of models used.
Life 0-255 50 The length of time the models with remain and blink, in 0.1s (50 = 5 seconds)

Format

#define TE_EXPLODEMODEL             107

message_begin(MSG_ ,SVC_TEMPENTITY)
write_byte(TE_EXPLODEMODEL)
write_coord(origin.x)
write_coord(origin.y)
write_coord(origin.z)
write_coord(velocity)
write_short(model index)
write_short(count)
write_byte(life in 0.1's)
message_end()

TODO: add rest, I'll get this done eventually.